aviosys sp-125 Quick Setup Guide

Before getting started, please check Network Power Splitter SP-125

 

package contents is integrated , 

router/switcher or PSE meet with the 802.3af. and power consumer is 5V/2A(max) or 12V/1A(max)           

Note: USB connect is used to 5V DC power supply only, not for data transmission 

            With problems, please refer to User Manual from the provided CD for details.

 

Your package ships with the following items: 

 

Network Power Splitter SP125   

 

  Terminal Block to 12V (1A) PowerJack Cable x 1pc.

 

 

POE Router ( PSE - Power supply ) 

: 

 

Ports:(From left to right ) :   

* 12V out    (1 Amp) : for IP Kamera or other power.     

* USB port : User can use the 4 pcs UDB power supply 

for users USB device.   

* Total Power wattage: 12 Watts   

* Power LED light: the green light will be on when 

power is received through RJ-45 jack from POE router 

 

Ports (Left to Right):   

* Lan Out: Normal network jack - no power input passed 

through in this port, only output 

* P+Data In : Receive power and data from POE router by 

normal RJ-45 cable jack.

 

1.  To get power from POE router, please connect RJ45 cable (not crossed cable) from POE router output to the 

SP=125 port “ P+Data In “  

2.  When connected there will be power & network signals. The USB ports, 12V Terminal Block port and 

Network (RJ45 Out) port on SP-125 will begin transmitting information and or power: 

* In front panel:   

User can connect “LAN OUT” to IP Camera / HUB / Router through RJ-45 jack to access network information. 

* In back panel:   

- 

Connect “12V out “ by 

Terminal Block to 12V (1A) Power Jack Cable

 to get 12V / 1A power   

- 

Connect “5V Power out “ by USB jack to connect devices (Such as USB FAN, USB Speaker and etc.)