ADC megabit modem 700f User Manual
Chapter 4: Setting Up For Configuration
Megabit Modem 400F, 500L, 600F, and 700F User Manual
29
Saving the Configuration to NVRAM
After clicking
Apply
at the bottom of a configuration page
,
the changes are automatically saved
to NVRAM. Changes may either take effect immediately or after system reset.
To the right is an example of a
configuration change (TFTP server IP
address) that only requires you to
click
configuration change (TFTP server IP
address) that only requires you to
click
Apply
for changes to take effect
immediately (commit changes to
RAM) and be saved to NVRAM.
RAM) and be saved to NVRAM.
Below is an example of a
configuration change (LAN IP
address) that requires both the click of
configuration change (LAN IP
address) that requires both the click of
Apply
at the configuration screen and a
system reset for changes to take effect
and to be saved to NVRAM.
and to be saved to NVRAM.
1
Locate Apply at the bottom of the
dialog.
dialog.
2
Click
Apply
to open the
confirmation dialog.
3
Click
OK
to reset the modem.