Sony AVD-S10 User Manual
24
GB
C
/
X
/
x
/
c
/ENTER
AMP MENU
To specify the size, distance, position and height of the speakers
1
Press AMP MENU repeatedly to display 9 SP. SETUP on the front panel display.
2
Sit in your listening position and select the item to be set using
X/x.
• Items set in 9 SP. SETUP
– Size of 5 speakers (front L/R, centre, rear L/R)
– with or without the subwoofer
– Distance of the front, rear, and centre speakers
– Position and height of the rear speakers
– with or without the subwoofer
– Distance of the front, rear, and centre speakers
– Position and height of the rear speakers
3
Set the parameter using
C/c.
The selected parameter will appear on the front panel display.
4
Repeat Steps 2 and 3 to set other parameters in 9 SP. SETUP.
If you do not operate the remote for a few seconds, the parameter turns off and is stored in
the receiver.
If you do not operate the remote for a few seconds, the parameter turns off and is stored in
the receiver.
x
SIZE
When you do not connect centre or rear speakers, or move the rear speakers, set the parameters
for F.SP., C.SP., R.SP., and S.W. The default settings are underlined.
• F.SP. (front speaker)
for F.SP., C.SP., R.SP., and S.W. The default settings are underlined.
• F.SP. (front speaker)
– LARGE: Normally select this.
– SMALL: Select this if the small speakers are used for the front speaker.
– SMALL: Select this if the small speakers are used for the front speaker.
• C.SP. (centre speaker)
– LARGE: Normally select this.
– SMALL: Select this if the small speaker is used for the centre speaker.
– NO: Select this if no centre speaker is used.
– SMALL: Select this if the small speaker is used for the centre speaker.
– NO: Select this if no centre speaker is used.