Sony 3-299-549-12(1) User Manual

* If your TV accepts progressive format signals, use this connection and set the output signal of the system to 

progressive format (page 37).

** HDMI (High-Definition Multimedia Interface)

If your TV has the HDMI jack, use this connection and select the type of output signal (page 36).

• During the “DMPORT” function, video signal is not output from the HDMI OUT and COMPONENT VIDEO OUT 

jacks.

• The system can accept both digital and analog signals. Digital signals have priority over analog signals. If the digital 

signal ceases, the analog signal will be processed after 2 seconds.

• When connecting the HDMI cable, make sure that the direction of jacks are the same.
• When connecting the digital optical cord, insert the connector until it clicks into place.

• You can connect another component, such as a VCR, digital satellite receiver, or PlayStation, to the TV (AUDIO 

IN) jacks (A) or TV (DIGITAL IN OPTICAL) jack (B) instead of the TV.

DMPORT

P

B

/C

B

P

R

/C

R

Rear of the control unit

To the VIDEO IN jack of 
the TV

To the digital optical output 
jack of the TV

Component video cord
(not supplied)

*

Video cord
(supplied)

HDMI

** cable

(not supplied)

Audio cord 
(not supplied)

Green
Blue
Red

White
Red

To the AUDIO OUT jacks of 
the TV

Digital optical cord
(not supplied)

To the HDMI IN jack 
of the TV

To the COMPONENT VIDEO IN 
jacks of the TV