Sony bravia 4-114-464-11(1) User Manual
7
G
e
tting Started
4
Use the supplied screws to attach the TV unit
to the Table-Top Stand (refer to the “Attaching
the Table-Top Stand” flyer).
to the Table-Top Stand (refer to the “Attaching
the Table-Top Stand” flyer).
• For product protection and safety reasons,
Sony strongly recommends that you use the
Wall-Mount Bracket model designed for your
TV and the wall-mounting of your TV should
be performed by a Sony dealer or licensed
contractor.
Wall-Mount Bracket model designed for your
TV and the wall-mounting of your TV should
be performed by a Sony dealer or licensed
contractor.
• For bracket installation, refer to the instruction
guide provided by the Wall-Mount Bracket
model for your TV. Sufficient expertise is
required in installing this TV, especially to
determine the strength of the wall for
withstanding the TV’s weight.
model for your TV. Sufficient expertise is
required in installing this TV, especially to
determine the strength of the wall for
withstanding the TV’s weight.
• Be sure to use the screws supplied with the
Wall-Mount Bracket when attaching the
mounting hooks to the TV set.
The supplied M6 screws are designed so that
they are 8 mm to 12 mm in length when
measured from the attaching surface of the
mounting hook.
The diameter and length of the screws differ
depending on the Wall-Mount Bracket model.
Use of screws other than those supplied may
result in internal damage to the TV set or cause it
to fall, etc.
mounting hooks to the TV set.
The supplied M6 screws are designed so that
they are 8 mm to 12 mm in length when
measured from the attaching surface of the
mounting hook.
The diameter and length of the screws differ
depending on the Wall-Mount Bracket model.
Use of screws other than those supplied may
result in internal damage to the TV set or cause it
to fall, etc.
• The TV can be wall-mounted as packaged. If you
decided to use the TV with the TV stand and later
want to wall-mount the TV, follow the steps
provided on this page to remove the Table-Top
Stand.
want to wall-mount the TV, follow the steps
provided on this page to remove the Table-Top
Stand.
• Be sure to store the unused screws and Table-Top
Stand in a safe place until you are ready to attach
the Table-Top Stand. Keep the screws away from
small children.
the Table-Top Stand. Keep the screws away from
small children.
For details on how to use the Wall-Mount Bracket
compatible with your model, visit
www.sony.com/accessories
Or call 1-800-488-7669 (for United States)
compatible with your model, visit
www.sony.com/accessories
Or call 1-800-488-7669 (for United States)
1-877-899-7669 (for Canada)
Follow the simple steps below to remove the
Table-Top Stand:
Table-Top Stand:
1
Unplug the AC power cord and disconnect all
the cables from the TV.
the cables from the TV.
2
Secure the Mounting Hook to the rear of the
TV.
TV.
3
Adjust the angle of the Mounting Hook.
4
Remove the screws on the rear of the TV (see
below). Do not remove any other screws from
the TV.
below). Do not remove any other screws from
the TV.
5
When screws are removed, lift the TV off the
stand. Make sure that you carry out this task
with at least two or three people. Do not
attempt to lift the TV by yourself.
stand. Make sure that you carry out this task
with at least two or three people. Do not
attempt to lift the TV by yourself.
Preparation for Wall-Mount Bracket
If an electric
screwdriver is used, set
the torque to tighten at
approximately 1.5 N·m,
15 Kgf·cm.
screwdriver is used, set
the torque to tighten at
approximately 1.5 N·m,
15 Kgf·cm.
M6 screw (supplied with the Wall-Mount
Bracket)
Bracket)
Mounting Hook
Rear of the TV set
8-12 mm
(Continued)