Sony cdx-c810dsp
18
Actual total number:
Sony CDX-C810DSP (E) 3-856-118-41 (2)
EN
3
Press (5) (ENTER) for two seconds.
The entire program is erased.
4
When you finish erasing programs, press
(3) (PLAY MODE) for two seconds.
(3) (PLAY MODE) for two seconds.
Adding tracks to the program
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
MODE) for two seconds.
“P 1” shows Program 1 is selected.
If you have labeled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display “P 1” above.
mode appears. Press (3) (PLAY MODE) to
display “P 1” above.
To select Program 2, press (4) (n)
repeatedly until “P 2” appears.
repeatedly until “P 2” appears.
2
Press (1) (N) or (4) (n) to select the
track slot number where you want to
insert a track.
track slot number where you want to
insert a track.
3
Press either side of (SEEK/AMS) to select
the track you want to insert.
the track you want to insert.
4
Press (5) (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
the track.
The current track in that slot number and
the succeeding tracks shift down.
To continue inserting tracks, repeat steps 2
through 4.
Note
Once all 12 slots have been filled, “*Mem Full*”
appears in the display, and you cannot insert more
tracks.
Once all 12 slots have been filled, “*Mem Full*”
appears in the display, and you cannot insert more
tracks.
5
When you finish inserting tracks, press
(3) (PLAY MODE) for two seconds.
(3) (PLAY MODE) for two seconds.
Playing the stored program
Changing the disc order in the changer will not
affect program memory play.
affect program memory play.
You can select:
•PGM 1 to play Program 1.
•PGM 2 to play Program 2.
•PGM 1+2 to play Programs 1 and 2.
•PGM 1 to play Program 1.
•PGM 2 to play Program 2.
•PGM 1+2 to play Programs 1 and 2.
1
Press (SHIFT).
2
Press (3) (PLAY MODE) repeatedly until
“PGM” appears.
“PGM” appears.
3
Press (4) (n) repeatedly until the
desired program appears.
desired program appears.
z PGM 1 z PGM 2 z PGM 1+2
PGM OFF
Z
Program Play starts.
To go back to the normal playback mode,
select “PGM OFF” in step 3 above.
select “PGM OFF” in step 3 above.
Notes
• If you press the number button during program memory
• If you press the number button during program memory
play, program memory play is interrupted, and playback
of the selected disc starts.
of the selected disc starts.
• “NO Data” appears in the display if no track is stored in
the program.
• If a track stored into the program memory is not in the
disc magazine, the track will be skipped.
• When the disc magazine contains not a single track
stored into the program memory, or when the program
information has not been loaded yet, “Not Ready”
appears.
information has not been loaded yet, “Not Ready”
appears.
Erasing the entire program
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
MODE) for two seconds.
“P 1” shows Program 1 is selected.
If you have labeled the disc, the bank edit
mode appears. Press (3) (PLAY MODE) to
display “P 1” above.
mode appears. Press (3) (PLAY MODE) to
display “P 1” above.
2
Press (1) (N) repeatedly until “DEL”
appears.
appears.
To erase Program 2, press (4) (n)
repeatedly until “PGM 2” appears.
repeatedly until “PGM 2” appears.
SUR EQ
PLAY MODE
ENTER
DISC
TRACK
4 7 P1.‚8
C D 2
SUR EQ
PLAY MODE
ENTER
--PGM1--
D E L
SUR EQ
PLAY MODE
ENTER
NO Data
P 1
SUR EQ
PLAY MODE
ENTER
DISC
TRACK
4 7 P1.‚8
C D 2
SUR EQ
PLAY MODE
ENTER
DISC
TRACK
3 2 P1.‚5
C D 2
Track slot number