Sony DAV-DZ700FW User Manual

r O

era

tions

By adjusting the remote signal, you can control
your TV with the supplied remote.

• If you enter a new code number, the code number

previously entered will be erased.

• When you replace the batteries of the remote, the

code number may reset itself to the default (SONY)
setting. Reset the appropriate code number.

Controlling TVs with the
remote

Press and hold TV

[

while entering your

TV’s manufacturer’s code (see the table)
using the number buttons. Then release TV

[

If you set successfully the manufacturer’s code,
the remote transmits the on/off signal of the TV.

Code numbers of controllable TVs

If more than one code number is listed, try
entering them one at a time until you find the one
that works with your TV.

To control the TV

You can control the TV by using following
buttons.

* Only for the Sony TVs.

You can select the TV channels by using the
number buttons.
- is for selecting a channel number greater than
10. (For example, for channel 25, press -, then
2 and 5.)

• Depending on the TV, you may not be able to control

your TV or to use some of the buttons above.

Other Operations

Controlling the TV with the
Supplied Remote

Note

TV VOL +/–

TV/VIDEO

Number
buttons

TV CH –/+

Manufacturer

Code number

SONY

DAEWOO

GRUNDIG

HITACHI

02, 04

JVC

MITSUBISHI/MGA 02, 06

PANASONIC

12, 15

PHILIPS

13, 14

SAMSUNG

02, 07, 13

SANYO

SHARP

THOMSON

TOSHIBA

08, 10, 11

By pressing

You can

TV [/1

Turn the TV on or off.

TV/VIDEO

Switch the TV’s input source
between the TV and other input
sources.

TV VOL +/–
while pressing
the TV button

Adjust the TV volume.

TV CH +/– while
pressing the TV
button

Select the TV channel.

Number buttons
while pressing
the TV button*

Select the TV channel.

Note