Sony DAV-X10 User Manual

Page of 111
masterpage:Left
specdef v20060111
filename[G:\FM\Sony\0607\DAV-X10_CEL\Source\3210565321DAVX10\gb04gsb.fm]
 model name [DAV-X10]
 [3-210-565-32(1)]
14
GB
Gettin
g
 Star
ted
 – B
A
SI
C
 –
2
Set up the AM loop antenna (aerial).
3
Connect the cords to the AM terminals.
Cord (A) or cord (B) can be connected to either terminal.
Note
• Do not place the AM loop antenna (aerial) near the unit or other AV equipment, as noise may result.
Tip
• Adjust the direction of the AM loop antenna (aerial) for best AM broadcast sound.
4
Make sure the AM loop antenna (aerial) is connected firmly by pulling softly.
To connect the FM wire antenna (aerial)
Connect the FM wire antenna (aerial) to the FM 75 
Ω COAXIAL jack.
Note
• Be sure to fully extend the FM wire antenna (aerial).
• After connecting the FM wire antenna (aerial), keep it as horizontal as possible.
Tip
• If you have poor FM reception, use a 75-ohm coaxial cable (not supplied) to connect the unit to an outdoor FM 
antenna (aerial) as shown below.
AM
A
B
Insert until this 
part.
Insert the cords pushing 
down the terminal clamp.
FM wire antenna (aerial)
(supplied)
FM 75 
Ω COAXIAL jack