Sony DAV-DZ250M User Manual

masterpage:Right

specdef v20061206

filename[E:\SS2007\Models\DS2KD\2895968E11\2895968E11DAVDZ250M\gb04gsb.fm]

 model name [DAV-DZ250M]

 [2-895-968-E1(1)]

X/x to select [YES].

Set up the calibration mic at the ear level 
using a tripod, etc. (not supplied). The front 
of each speaker should face the calibration 
mic, and there should be no obstruction 
between the speakers and the calibration 
mic. Be quiet during the measurement.

Auto Calibration starts.

• Loud test sound is output when [AUTO 

CALIBRATION] starts. You cannot turn the 
volume down. Give consideration to children 
and neighbor.

• Avoid being in the measurement area and 

making noise during the measurement (which 
takes about 3 minutes), as it may interfere with 
measurement.

C/

c to select [YES].

• The environment of the room in which the 

system is installed may affect measurements.

• If measurement fails, follow the message then 

retry [AUTO CALIBRATION].

• When you select [SECOND ROOM] for 

[SPEAKER FORMATION], measurement of 
[SURROUND L] and [SURROUND R] is not 
displayed.

Quick Setup is finished. All connections 
and setup operations are complete.

Press 

 DISPLAY in any Step.

• If you change the position of the speakers, reset the 

speaker settings. See “Getting Optimal Surround 
Sound for a Room” (page 65) and “Calibrating the 
Appropriate Settings Automatically” (page 67).

• If you want to change any of the settings, see “Using 

AUDIO IN / MIC 1 /

A.CAL MIC

Calibration mic

Connect calibration mic. Start
measurement?

YES

AUTO CALIBRATION

NO

FRONT L :
FRONT R :
CENTER  :
SUBWOOFER :
SURROUND L :
SURROUND R :
If OK, unplug calibration mic and select
“YES”.

YES

YES
YES
NONE
YES
NONE
NONE

Measurement complete.

NO