Sony DAV-DZ230 User Manual

ced

Settin

s a
nd A

justm

nt
s

x [AUDIO (HDMI)]

Selects the audio output status from the HDMI
OUT jack.

Note

• When you connect the unit and TV with the HDMI

cord and [ON] is selected, DYNAMIC BASS,
MOVIE/MUSIC, and sound field are not applied to
the sound that is output from the TV.

x [DivX]

(Except for United Kingdom and North
American models)

Displays the registration code for this system.
For more information, go to
http://www.divx.com on the Internet.

To obtain the best possible surround sound, set
connection of the speakers and their distance
from your listening position. Then use the test
tone to adjust the level and the balance of the
speakers to the same level.

Select [SPEAKER SETUP] in the Setup
Display. For details, see “Using the Setup
Display” (page 66).
The default settings are underlined.

Note

• You cannot operate these setup items when you

connect headphones to the unit.

To return to the default setting
when changing a setting

Select the item, then press CLEAR. Note that
only the [CONNECTION] setting does not
return to the default setting.

x [CONNECTION]

If you do not connect center or surround
speakers, set the parameters for [CENTER] and
[SURROUND]. Since the front speaker and
subwoofer setting is fixed, you cannot change
them.

[OFF]

The sound is not output from the
HDMI OUT jack.

[ON]

Outputs audio signals by
converting Dolby Digital, DTS, or
96 kHz/24 bit PCM signals to 48
kHz/ 16 bit PCM.

Settings for the Speakers

[SPEAKER SETUP]

[FRONT]

[YES]

[CENTER]

[YES]: Normally select this.

[NONE]: Select this if no center
speaker is used.

[SURROUND]

[YES]: Normally select this.

[NONE]: Select this if no
surround speaker is used.

[SUBWOOFER]

[YES]

SPEAKER SETUP

DISTANCE(FRONT):
DISTANCE(SURROUND):
LEVEL(FRONT):
LEVEL(SURROUND):

OFF

TEST TONE:

CONNECTION:

FRONT:
CENTER:

YES

SURROUND:
SUBWOOFER:

continued