Sony dav-sa35k User Manual

Page of 80
64
GB
x
LEVEL
You can vary the level of each speaker as 
follows. Be sure to set “TEST TONE” to “ON” 
for easy adjustment.
x
BALANCE
You can vary the balance of the left and right 
speakers as follows. Be sure to set “TEST 
TONE” to “ON” for easy adjustment.
To adjust the volume of all the 
speakers at one time
Use the VOLUME control on the system, or 
press VOL +/–.
x
TEST TONE
The speakers will emit a test tone to adjust 
“LEVEL” and “BALANCE.”
Adjusting the speaker 
balance and level
1
Press DVD SETUP in stop mode.
The Setup Display appears.
2
Press 
X
 or 
x
 repeatedly to select 
“SPEAKER SETUP”, then press 
ENTER.
3
Press 
X
 or 
x
 repeatedly to select “TEST 
TONE”, then press ENTER.
4
Press 
X
 or 
x
 repeatedly to select “ON”, 
then press ENTER.
You will hear the test tone from each 
speaker in sequence.
5
From your listening position, adjust the 
value of “BALANCE” and “LEVEL” 
using 
C
/
X
/
x
/
c
.
The test tone is emitted from both left and 
right speakers simultaneously.
6
Press ENTER when you have finished 
making adjustments.
7
Press 
X
 or 
x
 repeatedly to select “TEST 
TONE”, then press ENTER.
8
Press 
X
 or 
x
 repeatedly to select 
“OFF”, then press ENTER.
Note
When you adjust the speaker settings, the sound cuts 
off for a moment.
Tip
To adjust the balance or the level without 
listening to the test tone, select “BALANCE” or 
“LEVEL” in step 3 and press ENTER. Then 
adjust the balance or level using 
X/x and press 
ENTER.
CENTER 
0 dB
Adjusts the level of the center 
speaker (–6 dB to +6 dB, 1 dB 
increments).
SURROUND 
LEFT 0 dB
SURROUND 
RIGHT 0 dB
Adjusts the level of the surround 
speakers (–6 dB to +6 dB, 1 dB 
increments).
SUBWOOFER 
0 dB
Adjusts the level of the subwoofer 
(–6 dB to +6 dB, 1 dB increments).
FRONT 
CENTER
Adjusts the balance between the front left 
and right speakers. The center position is 
shown as “---”. (You can adjust from the 
center 6 steps left or right.)
OFF
The test tone is not emitted from the 
speakers.
ON
The test tone is emitted from each speaker 
in sequence while adjusting balance or 
level. When you select one of the 
“SPEAKER SETUP” items, the test tone is 
emitted from both left and right speakers 
simultaneously.