Sony HTCT260H User Manual

20

GB

Using the BLUETOOTH 
function

If the system is not paired with any 
equipment, you must pair the system 
with the equipment to be connected. 
Select “BT AU” with the 

 +/ buttons 

on the remote control to enter pairing 
mode.

1

2

 +/ to select “BT AU.”

3

Set the BLUETOOTH device in 
pairing mode.
For details on setting the 
BLUETOOTH device in pairing 
mode, refer to the operating 
instructions supplied with the 
device.

4

When the detected devices are 
listed on the BLUETOOTH 
device, check that “SONY
HT-CT260H” is listed.
On some BLUETOOTH devices, the 
list may not be displayed.

5

Select “SONY HT-CT260H” on 
the list.
If entering a Passkey is requested, 
enter “0000.”

6

Make the BLUETOOTH 
connection on the BLUETOOTH 
device.
When the BLUETOOTH connection 
is made correctly, the 

(BLUETOOTH) indicator lights 

up in blue and the pairing 
information is stored in the 
system.

The (BLUETOOTH) 

indicator 

lights 

up or flashes in blue to indicate the 
BLUETOOTH status.



For details on operation of the 
connected devices, refer to the 
operating instructions supplied with the 
devices.



The BLUETOOTH devices to be 
connected must support A2DP 
(Advanced Audio Distribution Profile).



Use a BLUETOOTH device such as 
BLUETOOTH mobile phone in an easily 
visible place in the same room where 
the Sound Bar is placed.



If Wi-Fi equipment is used, BLUETOOTH 
communication may become unstable. 
In that case, use the BLUETOOTH device 
as close as possible to the Sound Bar.

BLUETOOTH Function

During BLUETOOTH 
pairing

Flashes quickly in 
blue.

The system is 
attempting to 
connect with a 
BLUETOOTH device

Flashes in blue.

The system has 
established in 
connection with a 
BLUETOOTH device

Lights up in blue.

The system is in 
BLUETOOTH 
standby mode 
(when the system is 
off)

Flashes slowly in 
blue.