Sony har-lh500 User Manual
12
8
Press MENU/NO.
9
Press CD SYNC.
The HDD stands by for recording and the
CD stands by for playback.
CD stands by for playback.
To change the album position, press
ALBUM +/– repeatedly (or turn the
ALBUM dial on the recorder). To enter the
position directly, press ALBUM and the
numeric button(s) (see page 19).
ALBUM +/– repeatedly (or turn the
ALBUM dial on the recorder). To enter the
position directly, press ALBUM and the
numeric button(s) (see page 19).
10
Press
H
(or the PLAY/NEXT/PREV dial
(
H
) on the recorder) or
X
.
Recording starts.
The recorded sound is not audible during
High-Speed CD-HDD Synchro-Recording.
High-Speed CD-HDD Synchro-Recording.
To stop recording
Press x.
To extend the recordable
time (Recording Mode)
time (Recording Mode)
By recording tracks in the ATRAC3 format, the
total recordable time on the HDD becomes
longer than that possible in normal recording
mode.
total recordable time on the HDD becomes
longer than that possible in normal recording
mode.
1
Press REC MODE so that “ATRAC3”
appears in the display.
appears in the display.
2
Do steps 5 through 10 of “Recording a
CD to the HDD” on page 11.
CD to the HDD” on page 11.
Notes
• You cannot change the recording mode while
recording.
• You cannot change the recording mode to MP3
format.
To restore the factory setting
Press REC MODE again so that “ATRAC3”
disappears in the display.
disappears in the display.
To change the recording mode using
Setup Menu
You can also change the recording mode using
the Setup Menu.
the Setup Menu.
1
While the recorder is stopped or recording
pause, press MENU/NO.
pause, press MENU/NO.
“Setup Menu” appears in the display.
2
Press
<
/
,
repeatedly until “Rec Mode”
appears in the display, then press ENTER
or YES.
or YES.
3
Press
<
/
,
repeatedly until “ATRAC3”
appears in the display, then press ENTER
or YES.
or YES.
4
Do steps 5 through 10 of “Recording a CD
to the HDD” on page 11.
to the HDD” on page 11.
To restore the factory setting
Select “LinearPCM” in step 3.
Notes
• If the HDD becomes full during recording,
recording ends automatically.
• You cannot pause recording during Synchro-
Recording.
• If the CD play mode is set to Repeat Play or Shuffle
Play, it automatically switches to Normal Play.
• The HDD play mode automatically switches to
Normal Play.
• CD TEXT may not be saved for short tracks.
Tips
• You can record 10 times faster than normal CD-
HDD Synchro-Recording by doing High-Speed
CD-HDD Synchro-Recording with the recording
mode set to “LinearPCM” (factory setting) (this
page). If the recording mode is set to “ATRAC3,”
High-Speed CD-HDD Synchro-Recording will still
be 2 times faster than normal CD-HDD Synchro-
Recording.
CD-HDD Synchro-Recording with the recording
mode set to “LinearPCM” (factory setting) (this
page). If the recording mode is set to “ATRAC3,”
High-Speed CD-HDD Synchro-Recording will still
be 2 times faster than normal CD-HDD Synchro-
Recording.
• You can select the recording mode before you start
recording (this page).
• You can use Program Play to specify only the CD
tracks you want to record. After loading a CD, do
the procedure of “Programming the CD tracks” on
page 10. Then do the Synchro-Recording
procedure afterwards.
the procedure of “Programming the CD tracks” on
page 10. Then do the Synchro-Recording
procedure afterwards.
• If an inserted CD supports CD TEXT, CD TEXT
(track name only) can be saved to the HDD
automatically.
automatically.
• Synchro-Recording enables the assignment of
album and track names from the Gracenote CDDB
server. For details on the Gracenote CDDB
server,
refer to the Help for “M-crew for HAR-LH500.”
Recording a CD to the HDD
(continued)
(continued)