Sony HT-DDW870 User Manual
masterpage:Left
lename[D:\SONY SEM 2005\Revision Data\HT-
DDW870\J9050000_2549734151DDW870UCA\2549734151\GB06ADV_HT-DDW870-UCA.fm]
38
GB
model name1[HT-DDW870]
[2-549-734-15(1)]
x A.V.SYNC. X
(Time alignment)
• Y (Yes) (Delay time: 68 ms)
The audio output is delayed so that the time gap
between the audio output and visual display is
minimized.
between the audio output and visual display is
minimized.
• N (No) (Delay time: 0 ms)
The audio output is not delayed.
Notes
• This parameter is useful when you use a large LCD
or plasma monitor or a projection TV.
• This parameter is valid only when you use a sound
field selected with the 2CH or A.F.D. buttons.
• This parameter is not valid when PCM 96kHz,
DTS 96/24 or DTS 2048 signals are input or when
the receiver is performing DTS-ES Matrix 6.1
decoding.
the receiver is performing DTS-ES Matrix 6.1
decoding.
x DEC. XXXX
(Digital audio input decoding priority)
Lets you specify the input mode for the digital signal
input to the DIGITAL IN jacks.
input to the DIGITAL IN jacks.
The initial setting is “DEC. AUTO” for VIDEO 2 and
“DEC. PCM” for DVD and SA-CD/CD.
“DEC. PCM” for DVD and SA-CD/CD.
• AUTO
Automatically switches the input mode between
DTS, Dolby Digital, or PCM.
DTS, Dolby Digital, or PCM.
• PCM
PCM signals are given priority (to prevent the
interruption when playback starts). Even when other
signals are input, the sound is output. However, this
receiver cannot decode DTS-CD when set to “DEC.
PCM”.
interruption when playback starts). Even when other
signals are input, the sound is output. However, this
receiver cannot decode DTS-CD when set to “DEC.
PCM”.
Note
When set to “DEC. AUTO” and the sound from the
digital audio jacks (for CD, etc.) is interrupted when
playback starts, set to “DEC. PCM”.
digital audio jacks (for CD, etc.) is interrupted when
playback starts, set to “DEC. PCM”.
x DUAL XXX
(Digital broadcast language selection)
Lets you select the language you want to listen to
during digital broadcast. This feature only functions
for Dolby Digital sources.
during digital broadcast. This feature only functions
for Dolby Digital sources.
• M/S (Main/Sub)
Sound of the main language will be output through
the front left speaker and sound of the sub language
will be output through the front right speaker
simultaneously.
the front left speaker and sound of the sub language
will be output through the front right speaker
simultaneously.
• M (Main)
Sound of the main language will be output.
• S (Sub)
Sound of the sub language will be output.
• M+S (Main + Sub)
Mixed sound of both the main and sub languages will
be output.
be output.
x NAME IN
(Naming preset stations and inputs)
Lets you set the name of preset stations and inputs
selected with input buttons. For details, see “Naming
preset stations and inputs” on page 39.
selected with input buttons. For details, see “Naming
preset stations and inputs” on page 39.
GB01COV_HT-DDW870-UCA.book Page 38 Monday, June 20, 2005 4:43 PM