Sony HT-K170 User Manual
Amplifier Operations
13
GB
SYSTEM
CONTROL/
FUNCTION
CONTROL/
FUNCTION
MENU
control keys
control keys
Changing the Factory Setting
of a FUNCTION Button
of a FUNCTION Button
If the factory settings of the SYSTEM CONTROL/
FUNCTION buttons (“Using the remote” on page 12)
don’t match your system components, you can change
them. The following table shows the possibility of
alternate function assignment for each button.
FUNCTION buttons (“Using the remote” on page 12)
don’t match your system components, you can change
them. The following table shows the possibility of
alternate function assignment for each button.
Button
Possible assignment
VIDEO
VTR 1, VTR 2, VTR 3
DVD
DVD, LDP, CD
* Initial setting of VIDEO is VTR 3.
* Sony VCRs are operated with a VTR 1, 2, or 3 setting that
* Sony VCRs are operated with a VTR 1, 2, or 3 setting that
corresponds to Beta, 8mm, and VHS, respectively.
Resetting key table for function key VIDEO
VTR 1
CURSOR UP
VTR 2
ENTER/EXECUTE
VTR 3
CURSOR DOWN
Resetting key table for function key DVD
DVD
EXIT/RETURN
LD
DISPLAY
CD
CURSOR RIGHT
For example, if you connect a Sony LD player to the
DVD jacks, you can assign the DVD button to set the
remote to control the LD player.
DVD jacks, you can assign the DVD button to set the
remote to control the LD player.
1
Hold down the SYSTEM CONTROL/FUNCTION
button whose function you want to change (DVD,
for example).
button whose function you want to change (DVD,
for example).
2
Press the corresponding button of the component
you want to assign to the SYSTEM CONTROL/
FUNCTION button (DISPLAY, LD player, for
example).
you want to assign to the SYSTEM CONTROL/
FUNCTION button (DISPLAY, LD player, for
example).
Now you can use the DVD button to control your
Sony LD player.
Sony LD player.
To reset a button to its factory setting
Repeat the above procedure.
To reset all the function buttons to their factory setting
Press ?/1, AV ?/1 and MASTER VOL – at the same time.