Sony HT-SF370 User Manual

S-AI

R Op

eratio

To establish sound transmission, you need to
set the same ID for your S-AIR main unit and
S-AIR sub unit. However, if your neighbors
have S-AIR products and their IDs are the
same as yours, your neighbors could receive
the sound of your S-AIR main unit or vice
versa.
To prevent this, you can pair the S-AIR main
unit with a specific S-AIR sub unit by
performing the pairing operation.

x Before pairing

Sound transmission is established by the ID.

x After pairing

Sound transmission is established between the
paired S-AIR main unit and S-AIR sub unit(s)
only.

To perform pairing

Place the S-AIR sub unit that
you want to pair near the S-AIR
main unit.

Note

Remove headphones from the surround
amplifier (if connected).

Match the IDs of the S-AIR main
unit and the S-AIR sub unit.

• To set the ID of the S-AIR main unit,

see “To set the ID of the S-AIR sub
unit” (page 50).

• To set the ID of the S-AIR sub unit,

refer to the operating instructions
supplied with the S-AIR sub unit.

Press AMP MENU.

“LEVEL” appears on the display.

Press

V/v repeatedly until

“S-AIR SET” appears, then
press

Pairing the S-AIR main unit with
a specific S-AIR sub unit
(Pairing operation)

ID A

MASTER VOLUME

ACTIVE STANDBY

POWER/

Your room

S-AIR main unit

(this receiver)

S-AIR sub unit

Neighbor