Sony kd-32nx100u User Manual

DIGIT

AL

MODE

REC

5

0

4-206-398-02

Insert batteries into the remote control.

Connect the aerial to your TV.

Connect a video cassette recorder (VCR) to 
your TV.

Tune your TV.

View TV programmes.

Batteries

The following accessories are included with your TV.

RF Loopthrough cable

Remote Control

Always remember to dispose of batteries in an environmentally friendly way.

1. Connect your existing aerial lead to the Digital socket marked 

 on the

rear of the TV as shown.

2. Connect the supplied RF loopthrough cable from the socket marked 

to the analogue socket marked 

.

1. Connect your existing aerial to the Digital socket marked 

 on the rear of the

TV as shown.

2. Connect the supplied RF loopthrough cable from the lower socket marked 

on the TV to the RF IN socket on your VCR.

3. Connect a lead from the RF output of your VCR to the Analogue socket

marked 

 on the TV.

4. Connect a scart lead from the socket marked 

 on the rear of the TV

to the scart socket of your VCR (refer to VCR instructions).

5. Connect the VCR to the mains socket and switch on.
6. Insert a pre-recorded tape into the VCR and press the ‘PLAY’ button. This

enables the TV to locate and store the video channel during the ‘Automatically
tuning the TV’ procedure.

s

 3

 3

Place a coin in the slot 
provided at the bottom of 
the remote control.  Turn 
anti clockwise to release 
the battery compartment.

Insert the batteries as 
indicated in battery 
compartment.

Replace the battery 
compartment and lock in 
place by twisting coin 
clockwise in slot.

Supplied RF 
loopthrough
cable

RF loopthrough 
cable (supplied)

Existing
aerial

RF lead
(not supplied)

Scart lead
(not supplied)