Sony KDS-R60XBR1 User Manual
Connecting the TV
26
KDS-R50XBR1/KDS-R60XBR1
2-637-151-11(1)
D:\WINNT\Profiles\fujii\Desktop\SX_EN_source
_onDT062305\01US04INS.fm
_onDT062305\01US04INS.fm
masterpage:3 columns Right
Cable Box
For best results, use this connection if:
❑
Your cable company scrambles all channels, which requires you to use a
cable box.
cable box.
❑
With this connection you can:
❑
Use the TV’s remote control to change channels coming through the
cable box to the TV’s VHF/UHF input jack. (You must first program the
remote control for your specific cable box.)
cable box to the TV’s VHF/UHF input jack. (You must first program the
remote control for your specific cable box.)
To connect the cable box
1
Connect the CATV cable to the cable box’s input jack.
2
Use a coaxial cable to connect the cable box’s output jack to the TV’s
VHF/UHF input jack.
VHF/UHF input jack.
3
Run Auto Program, as described in “Setting Up the Channel List” on
page 34.
page 34.
Notes on Using This Connection
Before connecting a
cable box, see “Using
VHF/UHF
CATV cable
Coaxial cable
Rear of TV
Cable box
OUT
IN
To do this...
Do This ...
Use the cable box
Tune the TV to the channel the cable box is set to (usually channel 3
or 4) and then use the cable box to switch channels.
or 4) and then use the cable box to switch channels.
Set up the TV remote control to operate the cable
box
box
Program the remote control. See “Programming the Remote
Control” on page 48.
Control” on page 48.
Activate the remote control to operate the cable
box
box
Press SAT/CABLE (FUNCTION) once, and the SAT/CABLE
indicator lights up.
indicator lights up.
Prevent the accidental switching of TV channels Use the Channel Fix setting to set the channels for the cable box.