Sony KDS-R50XBR1 User Manual

D:\WINNT\Profiles\fujii\Desktop\SX_EN_source 
_onDT062305\01US04INS.fm

KDS-R50XBR1/KDS-R60XBR1

2-637-151-11(1)

Your new SXRD projection TV can receive both analog and digital 
broadcasting signals from antenna, satellite and cable TV.

To display clear crisp pictures, you must connect your TV correctly and 
choose the correct display format (see “Using the WIDE Button” on page 
53). It is strongly recommended to connect the antenna using a 75-ohm 
coaxial cable to receive optimum picture quality signal. A 300-ohm twin 
lead cable can be easily affected by radio noise and the like, resulting in 
signal deterioration. If you use a 300-ohm twin lead cable, keep it as far 
away as possible from the TV.

To get the most out of your TV, the input signals to the TV (and connected 
devices) should use the connections that provide the best video and audio 
performance. The chart below shows typical connectors that are currently 
available on the latest A/V devices.

* An adapter is necessary when you are connecting a DVI-equipped device to this TV 

(see page 22).

HDMI 
(High-Definition Multimedia Interface)

No

DVI (Digital Visual Interface) 

*

Yes

Component video
(480i/480p/720p/1080i)

S VIDEO

Composite video

RF/Coaxial

No

Y

P

B

P

R