Sony LBT-ZX80D User Manual
44
US
Notes
• When you set “TRACK SELECTION” to “AUTO”,
the language may change. The “TRACK
SELECTION” setting has higher priority than the
“AUDIO” settings in “LANGUAGE SETUP”
(page 41). However, depending on the disc, this
function may not be performed.
SELECTION” setting has higher priority than the
“AUDIO” settings in “LANGUAGE SETUP”
(page 41). However, depending on the disc, this
function may not be performed.
• If PCM, DTS, Dolby Digital, and MPEG audio sound
tracks have the same number of channels, the system
selects PCM, DTS, Dolby Digital, and MPEG audio
sound tracks in this order.
selects PCM, DTS, Dolby Digital, and MPEG audio
sound tracks in this order.
x
MULTI-DISC RESUME (DVD VIDEO and
VIDEO CD only)
VIDEO CD only)
Turns on and off the Multi-Disc Resume
function. The resume playback point can be
stored in the memory for up to 40 different DVD
VIDEOs or VIDEO CDs (page 19).
function. The resume playback point can be
stored in the memory for up to 40 different DVD
VIDEOs or VIDEO CDs (page 19).
x
AUDIO DRC (Dynamic Range
Compression) (DVD VIDEO and DVD-R/
DVD-RW in VR mode only)
Compression) (DVD VIDEO and DVD-R/
DVD-RW in VR mode only)
Narrows the dynamic range of the sound track.
Useful for watching movies at low volume late
at night.
Useful for watching movies at low volume late
at night.
Note
AUDIO DRC can only be performed with Dolby
Digital sources.
Digital sources.
Setting the speakers
— SPEAKER SETUP
To obtain the best possible surround sound, set
the size of the speakers you have connected and
their distance from your listening position.
Then, use the test tone to adjust the level of the
speakers to the same level.
the size of the speakers you have connected and
their distance from your listening position.
Then, use the test tone to adjust the level of the
speakers to the same level.
Select “SPEAKER SETUP” in the Setup menu.
For details, see “Using the DVD setup menu”
(page 40).
The default settings are underlined.
For details, see “Using the DVD setup menu”
(page 40).
The default settings are underlined.
To return to the default setting
when changing a setting
when changing a setting
Press CLEAR before you press ENTER.
However, note that you cannot return the setting
of “SIZE” to default setting.
However, note that you cannot return the setting
of “SIZE” to default setting.
Note
You cannot perform SPEAKER SETUP when you
connect headphones or microphones to the unit.
connect headphones or microphones to the unit.
x
SIZE
When you connect or disconnect the center
speaker, surround speakers or subwoofer or
when you move the surround speakers, change
the setting for CENTER, SURROUND and
SUBWOOFER. Since the front speaker setting
is fixed, you cannot change them.
speaker, surround speakers or subwoofer or
when you move the surround speakers, change
the setting for CENTER, SURROUND and
SUBWOOFER. Since the front speaker setting
is fixed, you cannot change them.
ON
Stores the resume playback point
in the memory for up to 40 discs.
in the memory for up to 40 discs.
OFF
Does not store the resume
playback point in the memory.
Playback starts at the resume
playback point only for the current
disc in the system.
playback point in the memory.
Playback starts at the resume
playback point only for the current
disc in the system.
OFF
No compression of dynamic
range.
range.
STANDARD
Reproduces the sound track with
the kind of dynamic range that the
recording engineer intended.
the kind of dynamic range that the
recording engineer intended.
MAX
Narrows the dynamic range fully.
SPEAKER SETUP
DISTANCE:
LEVEL(FRONT):
LEVEL(SURROUND):
LEVEL(FRONT):
LEVEL(SURROUND):
OFF
TEST TONE:
FRONT:
CENTER:
CENTER:
YES
BEHIND
YES
YES
SURROUND:
SUBWOOFER:
SUBWOOFER:
SIZE: