Sony LBT-ZX80D User Manual

Press CLEAR before you press ENTER. 
However, note that you cannot return the setting 
of “SIZE” to default setting.

You cannot perform SPEAKER SETUP when you 
connect headphones or microphones to the unit.

x

When you connect or disconnect the center 
speaker, surround speakers or subwoofer or 
when you move the surround speakers, change 
the setting for CENTER, SURROUND and 
SUBWOOFER. Since the front speaker setting 
is fixed, you cannot change them.

• When you change the setting, the sound cuts off for a 

moment.

• Depending on the settings of other speakers, the 

subwoofer may output excessive sound.

• When you play back a DVD VIDEO that does not 

have subwoofer output recorded, no sound is output 
from the subwoofer, even if “SUBWOOFER” is set 
to “YES”.

x

The default distance setting for the speakers in 
relation to the listening position is shown below.
When you set the distance using QUICK 
SETUP (page 14), the settings are automatically 
displayed. The items that are set to “NONE” in 
“SIZE” cannot be selected.

YES

YES: Normally select this.

NONE: Select this if the center 
speaker is not connected. 

BEHIND: Select this if the surround 
speakers are located in section B.

SIDE: Select this if the surround 
speakers are located in section A.

NONE: Select this if the surround 
speakers are not connected.

A

A

B

B

Position diagram

YES: Normally, select this 
(FST-ZX100D/LBT-ZX100D/
MHC-GN1000D only). 
Select this if you have connected an 
optional sub woofer (FST-ZX80D/
LBT-ZX80D only).

NONE: Select this if the subwoofer 
is not connected (FST-ZX100D/
LBT-ZX100D/MHC-GN1000D 
only). 
Select this if an optional sub woofer 
is not connected (FST-ZX80D/
LBT-ZX80D only).