Sony MDS-JE480 User Manual

masterpage:Left

(3 column)

filename[D:\Data Folder\sem\4238553111MDSJE480CEL\GB05OPE-CEL.fm]

 model name1[MDS-JE480]

 [4-238-553-11(1)]

Press MENU/NO or x in steps 1 to 6. If you 
press PUSH ENTER or YES in step 7 and 
recording starts, you cannot interrupt the 
operation.

• You cannot change the recorded level of a track 

recorded in LP2 or LP4 Stereo mode.

• Do not use an MD that is damaged or dirty. This 

may prevent recording data from being recorded 
properly.

• Changing the recording level repeatedly results in 

poor sound quality.

• The recording level will not return to the exact 

original level once the recording level has been 
changed even if it returned to the original level.

• The recording level cannot be changed while the 

timer is activated.

• You cannot undo any S.F edit operation with the 

Undo Function.

You can undo the last edit operation and restore 
the contents of the MD to the condition that 
existed before the operation. Note, however, 
you cannot undo an edit operation if you 
perform any of the following operations after 
the edit:

• Start recording.
• Press MUSIC SYNC on the remote.
• Change the recorded level after recording (S.F 

Edit).

• Turn off the deck or eject the MD.
• Disconnect the AC power cord.

“Edit Menu” appears in the display.

Turn AMS (or press ./> 
repeatedly) until “Undo?” appears.

“Undo?” does not appear if no editing has 
been done.

One of the messages appears depending on 
the last edit operation.

“Complete!” appears.