Sony pcg-fx902p User Manual

n N

❑

Check the Master Volume settings of the Sounds and Audio Device Properties. If you have 
connected speakers externally, check the volume settings of your computer speakers and check the 
connections between your speakers and the computer.

❑

In the Device Manager, check that the correct drivers are installed properly. To display the Device 
Manager, click Start, then Control Panel. Double-click the System icon. On the Hardware tab, 
click the Device Manager button.

❑

A dirty or damaged disc may cause the computer to 'hang' while it tries to read the disc. If necessary, 
reboot the computer, remove the disc and then check that it is not dirty or damaged.

❑

Check your PG settings (Parental Guidance) in the DVD software as they might be preventing you from 
playing certain DVDs when they are activated.

✍

On your computer, the default DVD region code is 2. Do not change this setting using the Region Code Change function in Windows

®

, or using any 

other software applications. System malfunctions originating from the user changing the DVD region code are beyond the scope of your warranty and 
will result in service charges for repair.

If you do not immediately see the Display icon after clicking Control Panel, click Switch to Classic View on the left.

Generally, the reading speed of a CD-RW is slower than that of a CD-ROM or CD-R. The reading speed can 
also vary depending on the type of format.

❑

The disk may be write-protected. Disable the write-protect feature or use a floppy disk that is not write-
protected.

❑

Check that the disk is properly inserted into the floppy disk drive.

❑

Your floppy disk may be corrupt. Try to insert another disk.