Sony PCS-TL33 User Manual

16

Adjusting the Height of the Display

  

Ch
apt

er 1  Ins

talla

ti

on and

 P

repa

ra

ti

on

The stand and the display section of the PCS-TL33 are 
joined by fastening screws. There are three sets of screw 
holes, spaced 25 mm apart. In the factory default 
condition, the display is fixed in the lowest position. By 
choosing a different set of screw holes, you can change the 
height of the display.

Remove the rear cover of the unit.

For information on how to do this, see page 15.

Remove the 4 screws using a coin or similar object, lift 
up the stand, and insert the positioning pin in the hole 
for the new stand position.

 

Before changing the height of the display as described 
above, be sure to turn the power off. Place the display 
face down on a soft cloth or similar.

Tighten the 4 screws using a coin or a similar object to 
secure the stand.

Attach the rear cover again.

Positioning pin