Sony PCS-TL33 User Manual

58

Adjusting the Camera

  

Ch
apt

er 3  Bas

ic

 Vide

oc
onf
ere

n

c

e

You can adjust the image shot by the local camera that is 
sent to the remote party to obtain the desired angle and 
size.
During communication you can also control the camera on 
the remote site to adjust the image shot by the remote 
camera.

The zoom and angle can be adjusted from the Camera 
Control menu, the camera image during communication, 
or the launcher screen when communication is not in 
progress.

The remote camera can only be adjusted during 
communication.
If the focus adjustment buttons appear on the remote 
camera adjustment screen, you can adjust the focus.

On the menu selection screen, click “Camera Control”.

The Camera Control menu appears.

Select the camera you want to control (“Near system” 
or “Far system”).

To zoom the image, click the 

 or 

 button under the 

image. 

Click the v/V/b/B symbols at the image edges to 
adjust the camera angle.

If you selected to control the remote camera, click the 
b/B buttons to adjust the focus.

Click   or the menu bar.

The Camera Control menu closes.

• When controlling a remote camera, “Far End Camera 

Control” must be set to “On” in the Communication 
Mode menu of the local system, and the remote system 
must be set to receive camera control commands. For 
details on setting the remote system, refer to the 
operating instructions for each device.

• You cannot control the remote camera during a session 

if the remote control format of the remote camera is not 
H.281. If you cannot control the remote camera, ask the 
remote party about the remote control format of their 
camera.

• If the local and remote parties try to control the same 

camera at the same time, the camera may not operate 
correctly.

Right-click on the local or remote image.

Zoom and angle buttons appear on the display.

When the image is from the local camera, a   
(Backlight compensation) button appears. Each click 
of this button toggles the backlight compensation 
function on and off.

Zoom

Camera Control

Control by Far End

Near system

Far system
Cancel

Preset

Auto Adjust

Backlight Compensation

Auto

Adjust

Flicker Removal

White Balance

Brightness Adjust

Save

Load

Start

Focus

Zoom

Camera Control

Control by Far End

Far system

Preset

Save

Load