Sony RHT-G11 User Manual
24
GB
By connecting Sony components that are
compatible with “BRAVIA” Sync via an HDMI
cable (not supplied), operation is simplified as
below:
• One-Touch Play (page 25)
• System Audio Control (page 26)
• System Power Off (page 26)
compatible with “BRAVIA” Sync via an HDMI
cable (not supplied), operation is simplified as
below:
• One-Touch Play (page 25)
• System Audio Control (page 26)
• System Power Off (page 26)
“BRAVIA” Sync is compatible with Sony TVs,
Blu-Ray Disc/DVD players, AV amplifiers, etc.,
with the Control for HDMI function.
Blu-Ray Disc/DVD players, AV amplifiers, etc.,
with the Control for HDMI function.
CONTROL FOR HDMI is a mutual control
function standard used by CEC (Consumer
Electronics Control) for HDMI (High-Definition
Multimedia Interface).
function standard used by CEC (Consumer
Electronics Control) for HDMI (High-Definition
Multimedia Interface).
The Control for HDMI function will
not operate correctly in the
following cases:
not operate correctly in the
following cases:
• When you connect the stand to components
which do not correspond with the Control for
HDMI function.
HDMI function.
• When you connect the stand and components
using other than an HDMI connection.
• When you connect non-Sony components
which are compatible with the Control for
HDMI function.
HDMI function.
We recommend that you connect products
featuring “BRAVIA” Sync to this stand.
featuring “BRAVIA” Sync to this stand.
• Depending on the connected components, the Control
for HDMI function may not work. Refer to the
operating instructions of the components.
operating instructions of the components.
To use “BRAVIA” Sync, set the Control for
HDMI function to on for the connected
components.
When you connect a Sony TV with the Control
for HDMI function, the Control for HDMI
function for the stand and the connected
components can be set simultaneously by setting
the Control for HDMI function of the TV.
HDMI function to on for the connected
components.
When you connect a Sony TV with the Control
for HDMI function, the Control for HDMI
function for the stand and the connected
components can be set simultaneously by setting
the Control for HDMI function of the TV.
1
Make sure that the stand is connected
to the TV and the connected
components via HDMI cables (not
supplied).
to the TV and the connected
components via HDMI cables (not
supplied).
2
Turn on the stand, the TV and the
connected components.
connected components.
3
Select the input of the stand and the
HDMI input of the TV (SAT/CATV, DVD,
BD), so that an image from a connected
component is displayed.
HDMI input of the TV (SAT/CATV, DVD,
BD), so that an image from a connected
component is displayed.
4
Display the list of the HDMI
components on the TV menu, and set
the Control for HDMI function to on for
the connected components.
components on the TV menu, and set
the Control for HDMI function to on for
the connected components.
The Control for HDMI function for the
stand and the connected components are
simultaneously set to on.
After you finish the setting, “COMPLETE”
appears in the front panel display.
stand and the connected components are
simultaneously set to on.
After you finish the setting, “COMPLETE”
appears in the front panel display.
• For details on setting the TV and the connected
components, refer to their operating instructions.
“BRAVIA” Sync Features
What is “BRAVIA” Sync?
Note
Preparing for “BRAVIA”
Sync
Sync
Note
DISPLAY
CENTER
SUBWOOFER
INPUT SELECTOR
AMP MENU
LEVEL
RETURN
MENU
?/1
AMP
MENU
MENU
C, X, x, c,