Sony SNC-DF70P User Manual

Page of 67
Oth
e
rs
Using the Custom Homepage Installer
59
Information boxes on the selected file are displayed 
on the left side of the window as follows:
Each click on the 
 (information) icon switches 
between “display” and “Not to display” of the file 
information.
Model name: Model name of the camera with 
which the file is recorded.
IP address: IP address of the camera with which 
the file is recorded.
Serial number: Serial number of the camera with 
which the file is recorded.
Record event: Type of event used for the 
recording: Sensor input, Periodical, Motion 
detection
 or Manual.
Date&time: Recording date and time
Movie: Video CODEC
Audio: Audio CODEC
Playing a video/audio file
Click 
 (start) to start playing from the beginning of 
the selected file.
To freeze the movie temporarily, click 
 (pause). 
Click 
 again to restart playing.
To stop playing, click 
 (stop). 
To restart playing, click 
 (start) again.
Play stops when the file is played to the end.
To play from a specified point
Move the slider bar below the image display, and 
playing starts according to the slider bar position.
Adjusting the sound
Adjust the playing sound volume by moving the 
 slider bar.  Move it to the left end for the 
minimum volume, and to the right end for the maximum 
volume.
Click the speaker icon to enable/disable the sound 
muting.
When the sound muting is on, no sound is heard even if 
you move the slider bar to the right.
Saving an image
Click 
 (capture) icon during playing or pause and the 
captured image is displayed on a pop-up dialog. To save 
the image, click Save on the dialog.  You can specify the 
destination to which the image is to be stored and select 
the JPEG or Bitmap format.
Using the Custom 
Homepage Installer
You can store the homepage that you have created in the 
camera and watch it.
Notes on creating the homepage
When you creating the homepage, note the following 
points.
• The file name should be typed up to 24 characters 
including the extension.
• The file size of the homepage should be 2.4 MB or 
less.
• To watch the created homepage, set the Default URL 
in the System setting menu.
Uploading the Custom Homepage 
Installer to the Camera
1
After a short time a window will open displaying 
the files on the CD-ROM.
2
Click the Setup icon of Custom Homepage 
Installer
.
The “File Download” dialog opens. 
3
Click Open.
The installer starts and notes are displayed.
Note
If you click “Save this program to disk” on the “File 
Download” dialog, the 
CustomHomepageInstaller.exe file will be saved on 
the computer. Double-click the saved file to start it.