Sony SNT-V304 User Manual

13

The 

 (Application Design) icon is used to configure

the monitor screen display and to determine the
operation of the video network station when an alarm
event occurs. Clicking the “Application Design” icon
displays the following screen.

Clicking the 

 (Layout and Application Wizard)

icon displays the “Layout and Application Wizard”.
The wizard first displays a configuration selection
screen.  The choices displayed in the screen are
explained below.
• [Layout]:Sets the monitor display style.
• [Alarm]:Sets the reaction to an alarm and the alarm

input.

• [Upload (FTP)]:Sets FTP image transfer.
• [Relay-OUT]:Sets the relay output for when the

[RELAY] button is clicked.

It is only possible to set  one [Alarm] or [Upload
(FTP)] for each video signal.

Which view do you
want to display as
default when
opening the Web
interface?

What type of
image do you want
to show in Web
pages?

What format do
you want ALL in
camera view to be
in?

Woud you like to
display the Sony
logo?

Please enter the
time for sequential
switching:

Select which image is tnl™e initially
displayed when the user accesses the
monitor screen:

• Camera View

Displays the video camera image

• HSR View

Displays the HSR-1/1P/2/2P image

Select the image size for the monitor
screen from the following:

• Fullsize

Display 352 ¥ 240 NTSC or 352 ¥
288 PAL

• Fullsize 

×

 2

Enlarges and displays Fullsize image
data in Hugesize (704 

×

 480 NTSC or

704 

×

 576 PAL).

• Hugesize

Display 704 ¥ 480 NTSC or 704 ¥
576 PAL

Select the images and layout to be
displayed on the monitor in the ALL
mode from the following:

• All cameras

All video camera images are
displayed.

• Camera 1 and 2 horisontally aligned

Images of the video cameras
connected to VIDEO 1 and 2
terminals are displayed side by side.

• Camera 1 and 2 vertically aligned

Images of the video cameras
connected to VIDEO 1 and 2
terminals are displayed one above
the other.

• Camera 1

Displays the video camera image
connected to the VIDEO 1 terminal.

Select whether to display the Sony

logo at the top of the page: either
[Yes] (display) or [No] (no logo).

Enter an image display interval for
each of the four video sources. Setting
0 for a video source causes it to not be
displayed on sequential mode. Also, if
a short interval is set, the image may
not be displayed, depending on
network conditions and processing
speed of the computer.