Omnitron iConverter Single-Fiber CWDM/AD 8878-35 User Manual
Product codes
8878-35
iConverter
iConverter
®
Single-Fiber CWDM Multiplexers and Add/Drop
MUX/DEMUX and Optical Add/Drop Mux Modules
iConverter
iConverter Single-Fiber Course Wave Division Multiplexing
(CWDM) modules provide a flexible and cost effective solution
for increasing fiber capacity over single fiber networks. CWDM
over single-fiber increases network bandwidth capacity by
enabling multiple wavelengths, or data channels that carry
independent services over existing fiber infrastructure. Up to
sixteen separate wavelengths can be transported on a single-
fiber link with iConverter Single-Fiber CWDM modules.
Single-Fiber CWDM/X Multiplexer/Demultiplexer Modules
Single-Fiber iConverter CWDM/X modules are available in 2
Single-Fiber iConverter CWDM/X modules are available in 2
and 4-Channel models, supporting a variety of wavelength
combinations and port configurations.
The figure above shows a pair of 2-Channel, single-fiber
CWDM/X units that operate using the 1550nm, 1570nm,
1590nm and 1610nm wavelengths. Note that each wavelength
is unidirectional and only flows in one direction. The channel
ports of iConverter CWDM/X model 8872 receive 1570nm
and 1610nm, while the channel ports of model 8873 receive
1550nm and 1590nm.
Single-Fiber CWDM/AD Add & Drop Multiplexers
iConverter 1-Channel Single-Fiber CWDM/AD modules are
Single-Fiber CWDM/AD Add & Drop Multiplexers
iConverter 1-Channel Single-Fiber CWDM/AD modules are
Course Wave Division Multiplexing (CWDM) Optical Add
and Drop Multiplexers (OADM). The CWDM/AD modules
add (multiplex) and drop (de-multiplex) one channel on both
directions of a CWDM single-fiber route. Nine standard
models of the 1-Channel Single-Fiber CWDM/AD modules
are available.
iConverter CWDM/AD modules add new access points
anywhere on a single-fiber CWDM network, without impacting
the remaining channels traversing the network. Access
iConverter
Single-Fiber
CWDM/X
2 and 4 Channel MUX/DEMUX modules
■
Scalable to 8 Channels using Band Splitter
■
iConverter
Single-Fiber
CWDM/AD
1-Channel Optical Add and Drop Multiplexers modules
■
Add and Drop functions in both directions
■
Common Product Features
Protocol and rate transparent for applications up to
■
10Gbps
Minimal and uniform optical loss facilitates easy
■
network planning
Industry standard LC connectors
■
Seamless integration with other
■
iConverter media
converters and chassis for multi-service platforms
Passive device that can be installed in a powered
Passive device that can be installed in a powered
■
chassis for managed applications
Manageable via SNMPv1/v2c/v3, Telnet or serial
■
console port
One (1) Year Warranty and Free 24/7 Technical Support
■
1-Module Chassis Not Included