Sony ZX6 User Manual
20
GB
Recording a disc by specifying
track order
track order
— Program Edit
You can record tracks from all the discs in the
order you want. Between step 2 and step 3 of
“CD Synchro Recording” (page 19), perform
step 1 to 6 of “Creating your own program”
(page 15). When programming, make sure the
playing times for each side do not exceed the
length of one side of the tape.
order you want. Between step 2 and step 3 of
“CD Synchro Recording” (page 19), perform
step 1 to 6 of “Creating your own program”
(page 15). When programming, make sure the
playing times for each side do not exceed the
length of one side of the tape.
Notes
• You cannot use Tape Select Edit for discs containing
over 20 tracks or MP3 audio tracks.
• You cannot listen to other sources while recording.
• Game Mixing does not function during CD Synchro
Recording.
Tip
To check the required tape length for recording a disc,
press EDIT after you have loaded a disc in CD
function. The required tape length for the currently
selected disc appears, followed by the total playing
time for side A and side B respectively (Tape Select
Edit).
press EDIT after you have loaded a disc in CD
function. The required tape length for the currently
selected disc appears, followed by the total playing
time for side A and side B respectively (Tape Select
Edit).
You can record just the portions you like from a
disc, tape or radio program on a tape. You can
also record from connected components.
disc, tape or radio program on a tape. You can
also record from connected components.
1
Load a recordable tape into deck B.
2
Press FUNCTION or TUNER/BAND
repeatedly (or press CD or press TAPE
repeatedly on the remote) to select the
recording source you want to record.
repeatedly (or press CD or press TAPE
repeatedly on the remote) to select the
recording source you want to record.
3
Load the disc or tape or tune to the
station you want to record. To record
from connected component, connect
the external audio sources.
station you want to record. To record
from connected component, connect
the external audio sources.
4
Press REC PAUSE/START.
Deck B stands by for recording.
REC PAUSE/START indicator flashes.
REC PAUSE/START indicator flashes.
If you want to record on the reverse side,
press h (TAPE B).
press h (TAPE B).
5
Press DIRECTION repeatedly to select
“
“
g
” to record on one side. Select
“
j
” (or “RELAY”) to record on both
sides.
6
Press REC PAUSE/START, then start
playing the source (for disc or tape).
playing the source (for disc or tape).
Recording starts.
To stop recording
Press x (TAPE B).
Recording to a tape
manually
manually
— Manual Recording