Denon AVR-687 User Manual

Advanced Operation

ENGLISH

When the ZONE2 SOURCE function is set to
“TUNER”, the preset channel can be selected pressing

[CHANNEL]

Press

[INPUT SELECTOR]

The ZONE2 source switches directly.

The output level of the ZONE2 SPEAKER OUT
terminals can be controlled pressing

[VOLUME]

Default setting (ZONE2 volume level):
– – – dB (Minimum)

Set

[MODE SELECTOR 1]

to the “AUDIO”.

Press

[ZONE2 ON]

• The ZONE2 indicator lights.

To cancel the ZONE2 mode:
Press [ZONE2 OFF].

Remote control unit operations during multi-
source playback (selecting the source)

This is only possible when the main unit in the ZONE2 mode (
page 43).

Set

[MODE SELECTOR 2]

to the “ZONE2”.

Multi zone music entertainment system

• ZONE2 speaker out can be used when “ZONE2” is selected at “Power Amp Assignment”. In this case, surround back speaker out cannot

be used for MAIN ZONE.

• For instructions on installation and operation of separately sold devices, refer to the devices’ operating instructions.
• The main zone output can be turned on and off with [MAIN].

¢ When using the SURR.BACK/ZONE2 amplifier as the ZONE2

• To use the ZONE2, turn on the ZONE2.
• The output of the ZONE2 SPEAKER OUT terminals can be adjusted with [ZONE2 VOLUME].
• The input source selected with [INPUT SELECTOR] is output for the ZONE2 speaker output.

[System configuration and connections example]
Using this unit’s internal amplifier as the ZONE2.

AVR-687

DVD player

Input

Monitor

MAIN ZONE 5.1-channel systems

ZONE2 SPEAKER OUT

SYSTEM REMOTE
CONTROL UNIT RC-1048

ZONE2

: Speaker cable

Refer to “Connections” (

page 17).