Nokia 3110c Service Manual

1. Needed tools: A Torx driver, a Torx Plus© size 6 bit, a torque 

driver, the SS-93 opening tool, a dental pick, flat bladed 

screwdriver, metal tweezers, the SS-45 camera opening tool, 

the SRT-6 and the DC plug.

2. Unlock and open the C-COVER ASSEMBLY.

3. First unlock the A-COVER with the SRT-6 at the lower side 

and lift it a bit.

4. Release the marked clips with the flat bladed screwdriver...

5. ...and then, carefully separate the A-COVER from the unit by 

slighting  the SRT-6 along the edges of the cover.

6. Remove the Keymat and discard the A-COVER.