Nokia 6021 Service Manual

nokia

EOPLE

ONNECTING

19 (22)

Approved 1.0

CMO Operations & Logistics

MGR

WW Service Solutions & Development

Bochum / Germany

IDENTIAL

17.3.2005

Service Manual 6021 Level 1&2

PAGE

CONF

14. BLUETOOTH & INFRARED TEST

Bluetooth test

You need another Bluetooth device (e.g. 6230) to do a GoNoGo test.

Make sure that Bluetooth is activated in the reference unit. The distance of the devices should be not more than
5m from each other.

Infrared test

You need another infrared device (e.g. 6230) to do a GoNoGo test. The infrared windows of the devices must be

directed to each other and should have a distance of approximate 15 cm. Make sure that infrared is activated in

receiver device.

Warning: Do not point the IR (infrared) beam at anyone’s eye or allow it to interfere with other IR devices. This

device is a Class 1 Laser product.

Test unit

Reference unit, Bluetooth /infrared activated

Settings on the test unit:

• Press the red End key to reach the Home Menu
• Select Names and select Search for an entry

If phone and SIM memory is empty, create one new entry.

•  Select an entry and select Details
•  Select Options
•  Select Send business card

A) - for infrared test: Select Via infrared

If sending of business card fails, make sure again that infrared windows are directed to each other and
infrared is activated in reference device. Then try again sending.
Test was successful, if you get this message on receiver device.
You will not get a confirmation on sender device.

B) - for Bluetooth test: Select Via Bluetooth

If needed (for e.g. after a sw-update), enter a name for this device

• select Options
• select Accept

Search window appears, if all Bluetooth devices in range will be displayed, the test is successful!

• Press red End key to reach the Home Menu

Note: If the Bluetooth is activated, switch it off!