Nokia 112T User Manual

GB 5

TV aerial
for connection of the antenna. 
Also, a Nokia active indoor antenna is 
powered from this
connection *

DC in
for connecting the cable 
from the external power 
supply 

TV SCART socket * *
for connection to the TV SCART

112 T = for a Viaccess smart card
120 T = for a Conax smart card

Digital audio
Digital audio output 
(TOS-link optical 
connection)

The box for your Mediamaster should contain the following items: 

• the Mediamaster 

• a remote control with 2 AAA batteries 

• a SCART cable (fully connected; 1.0 m) 

• an Introduction Guide 

• a separate power supply

• Remove the cover from the battery compartment at the bottom

of the remote control. 

• Insert the 2 AAA (1.5 V) batteries as shown in the diagram, 

taking care to observe the + and - markings indicated inside. 

• Replace the cover. 

When you connect other devices to this socket, always use a fully
connected SCART cable like the one supplied. There are SCART 
cables available that do not have all the pins connected, 
which could reduce picture quality if you were to use them. 

A constant green light indicates that the Mediamaster is 
switched ON. 
A constant red light indicates standby mode. 
The light flashes red when commands from the remote control 
are received. 
The light flashes green during software updates. 

Reset button

TV/VCR
For connecting to the 
RF socket on the TV, 
or to a Video 
recorder

SCART 
cable

Power supply