Nokia 6030 Service Manual

“Service Schematics“ was created with focus on customer care.

The purpose of this document is to provide further technical repair information for

NOKIA mobile phones on Level 3/4 service activities.

It contains additional information such as e.g. “Component finder”,

“Frequency band table” or “Antenna switch table”.

The “Signal overview” page gives a good and fast overview about the most

important signals and voltages on board.

Saving process time and improving the repair quality is the aim of this document.

It is to be used additionaly to the service manual and other training

or service information such as Service Bulletins.

All measurements were made using following equipment:

 

 

Nokia repair SW   

: 

Phoenix version 2006.20.9.148

Oscilloscope 

 

:  

Fluke PM 3380A/B

Spectrum Analyzer 

: 

Advanced R3162 with an analog probe

RF-Generator/GSM Tester : 

Rhode & Schwarz CMU 200

Multimeter 

 

: 

Fluke 73 Series II

While every endeavour has been made to ensure the accuracy of this document, some

errors may exist. If the reader finds any errors, NOKIA shall be notified in writing.

Please send E-Mail to:  training.sace@nokia.com

Copyright © NOKIA

This material , including documentation and any related computer programs is protected

by copyright, controlled by NOKIA. All rights are reserved. Copying, including reproducing,

modifying, storing, adapting or translating any or all of this material requires the prior

written consent of NOKIA. This material also contains confidential information, which may

not be disclosed to others whitout the prior written consent of NOKIA.