Nokia 7270 Service Manual
Issue 2 03/2005
COMPANY CONFIDENTIAL
27
Copyright © 2005 Nokia. All Rights Reserved.
Issue 2 03/2005
Nokia Customer Care
Drivers must be installed and card <accepted> by Phoenix. The following procedure has to be
made once for “acceptance”:
made once for “acceptance”:
-Select->Tools (Alt-T)
Options (Alt-O)
GPIB card (Alt-G)
The window “GPIB Card” pops up.
-Select ->Card Type: NI
Press “Start” and wait until the “listeners” are identified, then press “Close”.
The set up should now look like this:
Figure 22: GPIB Card
■
Automatic tuning procedure
-SelectTuning (Alt-U)
Auto-Tune (Alt-A)
Tune (Alt-T)
Log file
To enable the creation of a log file to save the calibration, tuning and measurement results edit
the command of the <autotune_RM-8/RM-47.ini> file as follows:
the command of the <autotune_RM-8/RM-47.ini> file as follows:
Row 8:Logging 1
Additional the path for the logging file can be defined in row 9. Delete the character <;> at the
beginning of the row to enable the command. Otherwise the log-files will be written to the di-
rectory\text-file:
beginning of the row to enable the command. Otherwise the log-files will be written to the di-
rectory\text-file:
-Phoenix\Products\RM-8/RM-47\autotune_results_yymmdd_hhmmss.txt