Panasonic KX-P7105 User Manual

Page of 4
Setup Guide    
Laser Printer      
Model No.
KX-P7105 / KX-P7110
Thank you for purchasing a Panasonic Laser Printer.
KX-P7105 is the model of laser printer without a network card. KX-P7110 comes standard with an Ethernet network device.
■ 
Using the Manuals
Setup Guide are divided into 1 or 2 parts as follows. Keep these documents in a safe place for future reference.
Setup Guide
First read this guide for basic setup procedures and necessary precautions for safety and use.
Be sure to read “For Your Safety” on the back of this guide before setting up the printer.
Network Setup Guide: Refer to the guide when connecting the printer with the network interface cable. This guide is included in
KX-P7110 only
Operating
Instructions:
For detailed information, refer to the Operating Instructions installed on your computer 
(see “Step 3: Installing the Printer Software”).
Printed in China
PJQQB0003ZA  S0901B0 M
Step 1
Installing the Drum Unit and Loading Paper
Note:
To prevent damage to the drum
unit, 
• Do not touch the black drum
surface (A).
• Do not expose to light for
more than 5 minutes.
• Do not expose to direct
sunlight. 
#
(Shake)
$
%
Toner cartridge
Shipping cover
&
Drum unit
Protective sheet
Side pin
Toner cartridge
'
(A)
#
#
Note:
• Paper, Transparencies or
Envelopes can be loaded in the
media tray.
• 
When loading legal paper, see
“Loading Media and Printing” of
“Settings and Printing” in the
Operating Instructions.
■ 
Installing the Toner Cartridge and Drum Unit
Connecting Cables
Note:
• Use a shielded cable 2.0 m (6.6 ft) or less in length.
Step 2
A  When using the parallel interface cable:
B  When using the USB interface cable: 
*
Microsoft® Windows® 98 operating system (hereafter Windows 98)
*
2
Microsoft® Windows® Millennium Edition operating system (hereafter Windows Me)
*
Microsoft® Windows® 2000 operating system (hereafter Windows 2000)
Note:
• Use a shielded cable 5.0 m (16.4 ft) or less in length.
• Windows® 98*
1
, Windows Me*
2
, Windows 2000*
3
or Mac
OS 8.5, 8.6 or 9.0 is required for a USB connection.
'
Insert the side pins of the toner cartridge
into the slots of the drum unit.
(
(
Push down
*
)
Side pin
,
+
+
Push down
*
Firmly insert the drum unit into the printer [insert the side pins of the
drum unit into the groove (label        )].
■ 
Loading Paper in the Media Tray
Fill paper up to here
$
 
Load paper with
     
print side down
.
Paper Full
Paper Low or
Empty
%
&
To a computer
Parallel interface
USB interface
#
%
$
A
B
C
Power cord
Network interface
Note:
If you do not have a
parallel interface cable
or USB cable, you will
need to purchase one.
C  When using the network interface cable
(KX-P7110 only): 
Note:
• Use category 5 shielded twisted pair cable with RJ-45
connector
Setup Guide