Panasonic workio dp-c354 User Manual
71
Chapter 2 More Menus F
eatures
Image Repeat
Create multiple images on the sheet from single original.
z
You can change to have dotted lines printed between each copy images. Refer to Copier Settings in the
Operating Instructions (For Function Parameters) on the provided CD-ROM.
Operating Instructions (For Function Parameters) on the provided CD-ROM.
z
This function can be selected when the original is placed on the platen.
z
As the original is placed on the platen, the position of the original may be erroneously detected if influenced by
ambient light.
ambient light.
z
If the margin around the original is 5 mm wide or less, the original may not be correctly detected, and the copy
image may be unclear.
image may be unclear.
1
Open the ADF more than 45 degrees,
and then place original(s) on the
platen, leave it open.
and then place original(s) on the
platen, leave it open.
z
Refer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
Operating Instructions (For Basic
Operations) of provided booklet.
2
Press the Copy key if the machine is
set to other function mode.
set to other function mode.
3
Select “More Menus”.
4
Select “Zoom / Effects”, and then
select “Image Repeat”.
select “Image Repeat”.
5
Select the desired type of paper, and
then select “OK”.
then select “OK”.
6
Enter the desired number of copies.
7
Press the Start key.
z
After finishing copying, press the Reset key
to return to the initial screen of the current
active mode.
to return to the initial screen of the current
active mode.
The minimum size of the
original is 20 mm x 20 mm.
original is 20 mm x 20 mm.