Panasonic workio kx-cl510 User Manual

Pinch the media guides and slide them to the width of 
the media.

Slide the length guide unit to adjust it to the media 
length. Slide the length guide unit (2) while pressing 
the PUSH mark (1) to extend it.

Tap the media stack on a level surface to avoid media 
jams or skewed printing.

NOTE:
• Be careful not to leave fingerprints on the media, which 

can result in a smudged print.

• Reusing media (used paper or jammed paper) that has 

been fed through the printer once can reduce the life of 
the consumables and paper path components.

Place media with the print side up under the hooks 
in the tray.

NOTE:
• Coated Paper, Transparencies or Envelopes can be 

loaded in the multi-purpose tray. See “About Media” of 
“Setting and Printing” in the Operating Instructions.

• Most media has instructions recommending the side to 

be printed first.

• Do not mix different types or thickness of media in the 

media tray at one time; this may cause a jam.

• Loading media exceeding the designated sheets may 

cause a media jam or shifting of print.

Confirm the media guides are adjusted to the media 
size.

Slide the media tray completely into the slot.

CAUTION
• Be sure to hold the media tray with both hands so that 

you do not drop it. The media tray weighs approximately 
6.4 kg (14 lbs.) when it is fully loaded.

Pull (1) and raise (2) the paper support so that the 
media does not drop from the output tray.

Fill media up 
to here.

Load media with 
print side up.

Hook

Paper support