Toshiba 6100 User Manual

A foreign object in the drawer could block laser light
from reading the CD. Make sure there is no ob-
struction. Remove any foreign object.

Check whether the CD is dirty. If necessary, wipe
it with a clean cloth dipped in water or a neutral
cleaner. See the 

Chapter 4 for details on cleaning.

Check your config.sys and autoexec.bat files to
make sure they have the necessary drivers and
execution lines.

Some CDs

The software or hardware configuration may

run correctly, but

be causing a problem. Make sure the

others do not

hardware configuration match’s your software’s
needs. Check the CD’s documentation.

Check the type of CD you are using. The drive
supports:
Enhanced CD (CD-EXTRA), Photo CD, CD-R (read
only), CD-ROM, CD-Rewritable (read only), CD-
ROM x A Mode 2 (Form1, Form2), CD-DA, CD-Text

If problems persist, contact your dealer.

You cannot access

Make sure the drive's drawer is securely

a CD in the drive

closed. Press gently until it clicks into place.

Open the drawer and make sure the CD is
properly seated. It should lie flat with the label
facing up.