Toshiba dkt2204-ct User Manual
Installation
Step 4: Connect Telephone Cables
Strata CTX DKT2204-CT/DKT2304-CT Cordless Digital Telephones 06/03
17
Step 4: Connect Telephone Cables
Your cordless telephone must be connected to a digital telephone PBX port.
➤
To connect as a stand-alone telephone
➤
Connect the modular jack labeled “Line
In” directly to the telephone wall jack
using one of the supplied cables (shown
at right).
In” directly to the telephone wall jack
using one of the supplied cables (shown
at right).
➤
To connect to a Strata DKT
1. Unplug the cable from the DKT and
plug into the “Line In” jack of cordless
telephone base unit (shown at right).
telephone base unit (shown at right).
2. Plug the additional two-foot cable into
the “Line Out” jack of the base unit and
into the DKT jack located on the
bottom of the telephone.
into the DKT jack located on the
bottom of the telephone.
WARNING!
➤
Never install telephone wiring during a lightning storm.
➤
Never touch uninsulated telephone wires or terminals unless
the telephone line has been disconnected at the network
interface.
the telephone line has been disconnected at the network
interface.
➤
Use caution when installing or modifying telephone lines.