Toshiba dkt2204-ct User Manual

If you do not have a standard wall plate, you can mount your telephone directly on a 
wall. Before mounting your telephone, consider the following:

Select a location away from electrical cables, pipes, or other items behind the 
mounting location that could cause a hazard when inserting screws into the wall.

Make sure the wall material is capable of supporting the weight of the base unit. 

Use #10 screws with anchoring devices suitable for the wall.

➤

1. Insert two mounting screws 3-15/16 inches apart. Allow 

about 3/16 of an inch between the wall and screw heads 
for mounting the telephone (shown right).

2. Plug and secure the AC adapter cord by following Steps 

2 and 3 of the 

3. Plug one end of the telephone line cord into the LINE 

jack on the base unit. Optionally, plug one end of a Strata 
DKT telephone into the PHONE jack. Then place the 
telephone cord(s) inside the molded channel(s) on the 
bottom of the wall mount stand.

4. Place the base unit on the posts of the wall screws 

and push down until it’s firmly seated.

5. Plug the other end of the telephone cord into a 

telephone wall jack.

6. Plug the AC adapter into a standard 120VAC wall 

outlet by following Step 7 of the Standard Wall 
Plate Mounting.