Toshiba hd-a2kc User Manual

Chapter

Connections

Connecting to an audio system

Caution

When you are connecting (via the DIGITAL AUDIO OUTPUT BITSTREAM/PCM jack) an AV decoder that does not

have Dolby Digital, DTS or MPEG decoding capability, be sure to set “Digital Output SPDIF” (

page 53) to “PCM”.

Otherwise, high volume sound may damage your hearing as well as the speakers.

Note about audio capabilities

Dolby Digital Plus and DTS-HD (DTS core only) capability limited to 5.1 channels.
DTS-HD processing of DTS core only. Full DTS-HD is not supported.

Via HDMI output

Caution

When you are connecting (via the HDMI OUTPUT jack) an AV decoder that does not have Dolby Digital or DTS

decoding capability, be sure to set “Digital Output HDMI” (

page 53) to “PCM” or “Downmixed PCM”. Otherwise,

high volume sound may damage your hearing as well as the speakers.

You can enjoy the benefi ts of Dolby Digital Plus or Dolby TrueHD by connecting the HDMI output of your player
to an AV receiver with an HDMI audio input. You can listen to down-converted Dolby Digital Plus and Dolby
TrueHD as well as Dolby Digital and DTS using a receiver with Dolby Digital and DTS decoding capabilities and
an optical digital input.

Set "Digital Output SPDIF"

(

page 53).

Via optical digital audio output

AV amplifier

Optical digital cable
(not supplied)

Digital input

Optical

HDMI compatible device

HDMI cable
(not supplied)

You may need to adjust the HDMI

audio output to match the

capabilities of your AV amplifier.

In this case, set “Digital Output

HDMI” ( page 53) to “PCM”.

• Set “Digital Output HDMI”
(

page 53).

AV amplifier

HDMI input

HDMI output

HDMI input

HD-A2KC_02_E_3 24

06.10.1 11:21:13 PM