Toshiba sd-63hk User Manual

You can also enjoy high quality dynamic sounds of an optional equipment by connecting with this unit.

• The OPTICAL IN and COAXIAL IN sockets are belong to LINE IN 1 input.

If you connect the DVD player using a Optical lead or Coaxial lead, the Video lead must be connected to LINE
IN1 VIDEO INPUT socket.

• If you connect your VCR or DVD player to LINE IN 1 sockets, you must set “LINE 1 select” setting to the

appropriate position. (See page 22.)

Notes:
• Refer to the owner’s manual of the connected equipment as well.
• If you place the unit near a tuner or radio, the radio broadcast sound might be distorted. In this case, place the unit away from

the tuner and radio.

• The output sound of the unit has a wide dynamic range. Be sure to adjust the volume to a moderate listening level. Otherwise,

the speakers may be damaged by a sudden high volume sound.

To
AUDIO/VIDEO INPUT

To
Optical
output

To OPTICAL IN

OPTICAL lead (not supplied)

COAXIAL lead (not supplied)

To COAXIAL IN

To

Coaxial

output

DVD Player

VCR

To Audio/Video outputs

To
Audio/Video
outputs

Audio/Video lead
(not supplied)

To AUDIO/
VIDEO
INPUT

Audio/Video lead (supplied)

Signal flow

Connect the supplied FM/AM aerials for listening to the radio.
• Connect the FM wire aerial to the FM-IN ANTENNA socket. Alternatively, you can connect the FM-IN ANTENNA

socket to a FM wall socket with coaxial cable (not supplied).

• Connect the AM loop aerial to the AM-IN ANTENNA terminals.

AM loop aerial (supplied)

FM wire aerial (supplied)

Notes:
• To prevent noise pickup, keep the AM loop aerial away from the unit and other component.
• Be sure to fully extend the FM wire aerial.
• After connecting the FM wire aerial, keep it as horizontal as possible.