Toshiba sd-v296ku User Manual

Page of 36
– 14 –
EN
2
Press [B] to “AUTO REPEAT” to set “ON” or “OFF”.
Press [SETUP] to exit.
              - M E N U -
 
 TIMER 
PROGRAMMING
 SATELLITE 
LINK
  B AUTO REPEAT     [ON]
 CLOCK 
SET
 LANGUAGE 
SELECT
Note:
• The auto repeat function can also be set “ON” or “OFF” by pressing [REPEAT] on the remote control. 
• To cancel auto repeat function, follow step 1 above. Then, press [B] so that “OFF” appears beside “AUTO REPEAT”. Press [SETUP] to exit.
• The auto repeat playback will start automatically if you select “AUTO REPEAT” to “ON” in the stop mode.
1
Press [SETUP], and choose “AUTO REPEAT”.
              - M E N U -
 
 TIMER 
PROGRAMMING
 SATELLITE 
LINK
  B AUTO REPEAT      [OFF]
 CLOCK 
SET
 LANGUAGE 
SELECT
SETUP
or
Auto Repeat
The unit will automatically rewind the cassette tape when it has reached the end and will automatically start playback unless you press 
[STOP C] or you turn off the unit.
 
VCR
VCR
1
Press [SETUP]. Select “TIMER PROGRAMMING”.
SETUP
   TIMER PROGRAMMING
 
 PROG 
  12345678
 DATE
 START 
TIME
 END 
TIME
 L1/L2
 REC SPEED
             - M E N U -
 
  B TIMER PROGRAMMING
 
SATELLITE LINK    
 
AUTO REPEAT      [OFF]
 CLOCK 
SET
 LANGUAGE 
SELECT
Available program number flashes.
2
Select an empty program number.
Then press [B] to go to next step.
 PROGRAM NUMBER   1
 DATE 
  – – / – –
 START 
TIME  – – : – – 
– –
 END 
TIME  – – : – – 
– –
 L1/L2 
  – –
 REC 
SPEED  – –
or
1
Insert a recordable 
cassette tape.
2
Press [INPUT SELECT] until “L1” or 
“L2” is displayed on the TV screen. 
Select “L1” to activate rear input jacks. 
Select “L2” to activate front input jacks.
3
Press [SPEED] to select the desired tape speed.
4
Press [REC/OTR] until desired recording time is selected.
5
Press [STOP C] to 
stop recording.
6
Press [OPEN/CLOSE A] to eject the 
recorded cassette tape.
Recording
To stop recording temporarily (pause mode)
Press [PAUSE F].
•  During the recording in pause mode, 5 C marks appear on the 
TV screen. Each C mark represents 1 minute.
• Press it again to resume recording.
•  Pause mode will be automatically canceled after 5 minutes to 
prevent damage to the cassette tape and the video head.
Note:
• Do not change the external tuner’s channel while you are recording. 
You CANNOT watch one channel and record another at the same time.
• Connect your external tuner to the L1 (rear panel) jacks of the unit. 
Connect camcorders and other such devices to the L2 (front panel) 
jacks. Refer to page 11.
This unit has no tuner system so it cannot receive TV broadcasts without external 
tuner or such devices.
Timer Recording
 
VCR
VCR
Accidental Erasure Prevention
To prevent accidental recording, remove erase-
protection tab of the cassette tape. To record 
on it later, cover the hole with adhesive tape.
Recording & One-touch Timer Recording (OTR)
Tape speed
Recording / playback time
Type of tape
T60
T120
T160
   SP mode
1hour
2hours
2-2/3hours
   SLP mode
3hours 
6hours
8hours
Note:
• You can also set to external tuner. Refer to “Satellite Link” on page 16.
TV
external tuner
this unit
6
3
2
5
4
1
6
5
REC
SP
STOP
OPEN/CLOSE
SPEED
REC/OTR
 
VCR
VCR
 
erase-protection tab
INPUT
SELECT
REC                             OTR  (0:30)            OTR  (1:00).....
(normal recording)
OTR  (8:00)                   OTR  (7:30) 
See note on the right.
• Insert a recordable cassette tape.
•  Make sure to turn on the external 
tuner.
4
E8EB5UD_SD-V296KU_EN_ES_v1.indd   14
E8EB5UD_SD-V296KU_EN_ES_v1.indd   14
2008/07/14   10:37:13
2008/07/14   10:37:13