Toshiba sd-m1401 User Manual
5
Audio Cable (optional) - If you have a sound
card and speakers, and would like to play audio
CDs on your computer, you will need to install a
CD/DVD audio cable. Toshiba's DVD-ROM
drives use a standard 4-pin audio cable that can
be purchased from most local computer
suppliers. The sound cable connects to your
sound card at one end and the other end
connects to the digital audio connector at the left
rear of the DVD-ROM drive (see DVD-ROM
drive Back Panel photo for location). Refer to the
instructions that came with your sound card for
details on any sound-driver software required.
card and speakers, and would like to play audio
CDs on your computer, you will need to install a
CD/DVD audio cable. Toshiba's DVD-ROM
drives use a standard 4-pin audio cable that can
be purchased from most local computer
suppliers. The sound cable connects to your
sound card at one end and the other end
connects to the digital audio connector at the left
rear of the DVD-ROM drive (see DVD-ROM
drive Back Panel photo for location). Refer to the
instructions that came with your sound card for
details on any sound-driver software required.
Figure 5.Installing Audio Cable
Daisy-Chaining - If the DVD-ROM you
are installing is one of two or more
SCSI devices you are connecting to
your system, you will need to use a
custom built SCSI interface cable.
Remember that the terminator jumper
on the DVD-ROM drive must have the
jumper installed when the drive is the
last device in the chain.
are installing is one of two or more
SCSI devices you are connecting to
your system, you will need to use a
custom built SCSI interface cable.
Remember that the terminator jumper
on the DVD-ROM drive must have the
jumper installed when the drive is the
last device in the chain.
Figure 6. Daisy-Chaining Multiple
Drives
Drives