LG m4210l User Manual

33

*  Vertical frequency: To enable normal viewing, the screen image should be changed tens of 

times every second like a fluorescent lamp. The vertical frequency or refresh rate is the number 

of times an image is display per second. The unit is Hz.

*  Horizontal frequency: The horizontal interval is the time it takes to display one vertical line. 

When 1 is divided by the horizontal interval, the number of horizontal lines displayed every 

second can be tabulated as the horizontal frequency. The unit is kHz.

• See if the power cord is properly connected to the outlet.

• See if the power switch is turned on.

• May need service.

• Adjust brightness and contrast again.

• Backlight may need repair.

•  If the product is in power saving mode, move the mouse 

or press any key.

• Turn both devices off and then back on.

•  The signal from the PC (video card) is out of the vertical 

or horizontal frequency range of the product. Adjust the 

frequency range by referring to the specifications in this 

manual.

     RGB : 1920 x 1080 @ 60 Hz

     HDMI/DVI : 1920 x 1080 @ 60 Hz

•  The signal cable between PC and product is not 

connected. Check the signal cable.

•  Press the 'INPUT' menu in the remote Control to check 

the input signal. 

● 

● 

●  

● 

● 

●  

•  Install the product driver provided with the product, or 

download it from http://www.lg.com

•  See if the plug & play function is supported by 

referring to your video card user manual.

● 

•  The control locking function prevents unintentional OSD 

setting change due to careless usage. To unlock the 

controls, simultaneously press Menu and      for several 

seconds. (You cannot set this function using the remote 

control buttons. You can only set this function with the 

controls on the product.)

●