Emerson bar330 User Manual
8
19
Settings and Adjustments
Once the initial setup has been completed, the player can
always be operated under the same conditions. The settings
will be retained in the memory, until the settings are changed.
always be operated under the same conditions. The settings
will be retained in the memory, until the settings are changed.
TV Display
1. Press the SETUP button to enter the Setup Menu.
2. Use the (
,
) Navigation buttons to select General.
3. Use the (
,
) Navigation buttons to move the cursor to the
TV Display item.
4. Use the (
) Navigation button followed by the (
,
)
Navigation buttons to select between Normal/PS (Pan &
Scan), Normal/LB (Letterbox), and Wide formats.
Scan), Normal/LB (Letterbox), and Wide formats.
Normal/PS (Pan & Scan):
Video material formatted in the PAN & SCAN style is played
in that style (the left and right edges are cut off).
Video material formatted in the PAN & SCAN style is played
in that style (the left and right edges are cut off).
Normal/LB (Letterbox):
Video material not formatted in the Letterbox style is played
in the Pan & Scan style.
Video material not formatted in the Letterbox style is played
in the Pan & Scan style.
Wide:
Select this for a wide screen TV set.
Select this for a wide screen TV set.
5. Press the ENTER button.
6. Using the (
,
,
,
) Navigation buttons and press ENTER
to exit and save setting.
TV Type
1. Press the SETUP button to enter the Setup Menu.
2. Use the (
,
) Navigation buttons to select General.
3. Use the (
,
) Navigation buttons to move the cursor to
the TV Type item.
4. Use the (
) Navigation button followed by the (
,
)
Navigation buttons to select between NTSC, and PAL
modes.
modes.
- - General Setup Page - -
Set TV Display Mode
Preference
Dolby
General
Audio
TV Display
TV Type
Angle Mark
OSD Lang
Captions
Screen Saver
PS
NTSC
ON
ENG
ON
ON
Normal/PS
Normal/LB
Wide
5. Press the ENTER button.
6. Using the (
,
,
,
) Navigation buttons and press ENTER
to exit and save setting.
Angle Mark
1. Press the SETUP button to enter the Setup Menu.
2. Use the (
,
) Navigation buttons to select General.
3. Use the (
,
) Navigation buttons to move the cursor to the
Angle Mark item.
4. Use the (
) Navigation button followed by the (
,
)
Navigation buttons to select between On and Off modes.
This only works when there is an angle mark on the disc.
This only works when there is an angle mark on the disc.
Note: Select "On" the screen shows the angle mark when
playing a DVD.
Select "Off" the angle mark is not shown.
Select "Off" the angle mark is not shown.
5. Press the ENTER button.
6. Using the (
,
,
,
) Navigation buttons and press ENTER
to exit and save setting.
- - General Setup Page - -
Set TV Standard
Preference
Dolby
General
Audio
TV Display
TV Type
Angle Mark
OSD Lang
Captions
Screen Saver
PS
NTSC
ON
ENG
ON
ON
NTSC
PAL
- - General Setup Page - -
Set Angle Mark
Preference
Dolby
General
Audio
TV Display
TV Type
Angle Mark
OSD Lang
Captions
Screen Saver
PS
NTSC
ON
ENG
ON
ON
On
Off
BARBIE BAR330_Eng P13-26.p65
2/2/2007, 3:30 PM
19