atlantis-land-1 netfly wireless usb adapter usb 54 User Manual

    USER MANUAL 

Wireless USB Adapter                                 9 

•  Visually inspect the USB Adapter and make sure that it is fully 

plugged in to the USB slot. 

•  Make sure that there is a well environment that there is no much 

intrusion to have a better connection. 

Link 
The Link LED indicator lighted green when the Wireless Adapter is 
connected to wireless network successfully.  

The LEDs of the Wireless LAN Adapter are clearly visible and the status of 
the network link can be seen instantly: 

1.  When connected to the USB port and the driver were installed, the 

LNK LED will start blinking, and it means that the device is starting 
to scan an 802.11g wireless device near the 802.11g Wireless 
USB 2.0 Adapter. 

2.  While the 802.11g Wireless USB 2.0 Adapter linked up to the 

Access Point or to other Wireless LAN station, the LINK LED will 
always light up. 

1.  Insert the CD-ROM and the Auto-run program will appear. 

Alternatively, open a file browser and double click on the 
autorun.exe file located in the CD directory. In some specific 
setting on Windows system, you may need to proceed the 
software manually, go to your Windows Start menu and choose 
Run, type “D:\USB\Vista\Setup.exe” or 
“D:\USB\XP2K\Setup.exe”in the dialog box and click OK. 

Note: (D:\ will depends on where the CD-ROM drive is located and 
<Windows OS> will depend on the Windows OS you are using).