Epson FX-1180+ User Manual
Setting Up the Printer
1-9
R
R4C7930
shrimp.bk
shrimp.bk
Rev.C
shrimpsetup.fm
A5 size
11/26/01
Pass 1
Proof Sign-off:
ABE Y. Azuma A. Nagasawa
T. Takahashi
ABE S. Halvorson
ABE Y. Azuma A. Nagasawa
T. Takahashi
ABE S. Halvorson
4. Plug the other end of the cable into the computer’s parallel
interface port. (If there is a ground wire at the end of the
cable, attach it to the ground connector at the back of the
computer.)
cable, attach it to the ground connector at the back of the
computer.)
Using the USB interface
To connect the printer to a USB port, you need a standard,
shielded USB cable.
shielded USB cable.
Note:
Your computer must be a Windows Me, 98, or 2000 pre-installed
model that is equipped with a USB port. If you use a USB hub, it is
recommended that you connect the printer to the first tier of the hub or
connect the printer directly to the computer’s USB port.
Your computer must be a Windows Me, 98, or 2000 pre-installed
model that is equipped with a USB port. If you use a USB hub, it is
recommended that you connect the printer to the first tier of the hub or
connect the printer directly to the computer’s USB port.
Follow these steps to connect the printer to your computer using
the printer’s built-in USB interface:
the printer’s built-in USB interface:
1. Make sure both the printer and computer are turned off.
2. Plug the appropriate end of the cable into the USB port on
the back of the printer.
3. Connect the other end of the cable to the computer’s USB
port.